Kegco Single Tap Kegerator with X-CLUSIVE Premium Direct Draw Kit - Right Hinge HK38BSU-1

Description

Kegco Single Tap Kegerator with X-CLUSIVE Premium Direct Draw Kit - Right Hinge  HK38BSU-1

The best  kegerator should have premium components, and the draft beer dispense system included with the HK38BSU-1 is second to none. You won't find a better value anywhere in the market!

• Includes a brand new 5 lb. Aluminum CO₂ Tank with Electric Red Epoxy Finish 
• These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada Markings.
• The 320 Valves are CGA approved, and have a male thread for Co2 Regulators. An average fill is good for 5-6 kegs depending upon your fill.
  This tank is produced from high strength aluminum alloy 6061-T6, a highly corrosion-resistant material.
• It features an eye-catching glossy powder coated epoxy finish in Electric Red that acts as an extra layer of protection against corrosion and wear. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. 
• Includes Premium Double Gauge CO₂ Regulator 
  The regulator works with any CO₂ Tank with a CGA-320 valve and measures PSI, as well as the volume of the CO₂ gas in the Cylinder. It has a pressure release valve and a large hand control which makes it easy to adjust the pressure inside keg.
• Includes 5 feet of 5/16" I.D. Blue Air Line Assembly with 2 Snap Clamps 
•  The air line assembly comes with two plastic snap clamps with a reusable clamp design.
• This standard length 5 foot 5/16" I.D. blue air/CO₂ tubing is made of thermoplastic vinyl hose (Super Vinyl). This tubing will not rot, swell, or dry out, and is unaffected by normal cleaning compounds.
• Includes a D system lever handle keg coupler that can tap all domestic kegs 
• This commercial grade lever handle keg coupler works with all American "D" system Sankey kegs. It features a 55-psi pressure relief valve and a nickel-plated forged brass body. To tap a keg, simply pull out and then down on the lever handle.
• Includes a 3" Diameter Polished Stainless Steel Draft Tower 
• This tower is mounted using the gasket and four screws that are included.
• This NSF-approved tower is a 3" diameter single faucet metal draft tower made of polished stainless steel and inlcudes 5 feet of 3/16 inch I.D. clear beer tubing.

• Maximum Ambient Temperature: 100 degrees Fahrenheit
• Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the ambient temperature.
• A perfect option for dispensing beer, soda, kombucha, wine or cold brew coffee
• Stainless steel guard rail helps prevent mugs and glasses from sliding off
• Stainless steel interior is more durable than the plastic liner found in most kegerators
• Plugs into standard home outlet
• All dispensing accessories are UL recognized components
• Converts into a refrigerator using 2 full-width shelves that can be adjusted in 1/2" increments
• Large enough to hold most full size kegs, including Coors and Miller. Interior height is a limitation, so kegs that are taller than the standard half barrel (23.25" may not fit with the keg coupler installed. We have run into this issue with certain German kegs along with the M system coupler, but most major brands in D and S System kegs will not be an issue.
• Holds (1) full-size keg, (2) quarter slim kegs, (3) 5 gallon commercial kegs, or (3) 5 gallon home brew kegs
• Sleek black cabinet with stylish stainless steel door
• Digital temperature control keeps temperature between 23-59 degrees Fahrenheit